Gong Hay Fat Choy! Year of the Rabbit

To celebrate Chinese New Year, I made up twenty more Year of the Rabbit boxes to share with  family at our Chinese New Year dinner celebration and to pass out to our friends. These look almost identical to the boxes I posted at the beginning of the year, but actually are alot smaller.

Here's a photo with both boxes side by side for a size comparison...

As mentioned in the earlier post, the larger box comes from an original Design Studio cutfile created and shared by Tanya Strom over at Custom Crops. I decided this time that I wanted to try a smaller sized box that I could use to hold some pizzelles. It took me a while to figure out (I hate geometry!), but after several tries I finally was able to create a cutfile in Design Studio using George and Plantin Schoolbook for a smaller version. This smaller trapezoid box measures 5 inches across at its widest point at the top of the box and little over 3 inches at the bottom. Happily, resizing the rabbit to a smaller one was really easy with Make the Cut.

But as I hastily tried to put together twenty of these boxes...you know what they say about haste and waste... I did my classic boo-boo and ended up cutting twenty rabbits in pink instead of white.

Couldn't stand the thought of trashing all those pink bunnies, so I decided I would use them to make "lucky money envelopes" (lai si)...

The cutfile for the envelopes was simple to do with George and Design Studio, and I used some washi paper from my scrap stash to decorate the envelopes.

Xin Nian Kuai Le! Have a Happy New Year!

World's Best Dad

Chose to do yet another accordian flag book card, this time for a birthday card for my dad. Really like that these are fairly easy to put together and are really fun and quite impressive for the recipient to open. For the front of dad's card, I used the globe cut on the Locker Talk cartridge and a Darcie bear image rendered into a cutfile using Make the Cut (MTC).

I made this into a trifold card so I would have an extra page to add a sentiment and used ribbon tied into a bow to keep the card closed.

Here's what the card looked like on the inside when fully open with the flags in place. Used another Darcie bear image created with MTC and trophy is cut from a very old Sizzix die. Alphas on the flags are from Plantin Schoolbook.

And here's the top view showing the pleats.

The finished card, tied closed with it's bow, went into this box created with printed cardstock from DCWV. Used a simple belly band and medallion embossed with a "Happy Birthday" Cuttlebug die to decorate the box and it was ready for giving.

2011 Hops in Like a Rabbit

Happy New Year! For my very first project of the year and in celebration of the Year of the Rabbit, I made up a little over a dozen of these large trapezoid boxes filled with goodies to give to relatives at our New Years get together. I found a Design Studio cutfile for large chipboard boxes created and shared by Tanya Strom over at Custom Crops.

Tanya's cutfile was for just the right size box I was looking for, but because it was intended to be constructed from chipboard and tape, the sides of the box are not connected in the original cutfile.  Since I wanted to use cardstock instead to make my boxes, I tweaked & modified Tanya's file in Design Studio a bit by welding the sides and bottom together, adding scorelines for folding and tabs to the sides that needed to be glued.

The finished size of this box is large...about 7 inches wide, 4-1/2 inches high and about 3-1/2 inches in depth...and takes 3 sheets of 12x12 cardstock to create. The bottom of the box is reinforced with two layers of cardstock, which makes it sturdy enough to hold at least a dozen or more cookies.

To decorate my boxes, I wanted to use washi paper, but with each box requiring 1-1/2 sheets of 8x11 paper, and over a dozen boxes to embellish, I knew I would run short. Instead, I used a scanned image of some washi paper I had, printed up on Ice Gold Text. The rabbit is a cutfile created using Make The Cut (MTC) from an image found on the internet. Filled the boxes with goodies and finished it off with some ribbon tied into a bow.

In the Nick of Time (...barely!)

Our family Christmas cards barely got to the post office in time this year. (Note to self...no more paper piecing for Christmas cards!) Those little reindeer from Create A Critter are adorable, but piecing together 180 reindeer (2 per card) took way too long to do!
Our card this year was a swing style card. Took me a while to figure out, but I managed to create a cut file for it in Design Studio, which made cutting and scoring the card base pretty quick. I used Bazzill Bling (Feather Boa) for the base card and patterned paper is from the Provincial Princess collection at Lettering Delights, printed on ice gold text.

Holly and leaves are from a Martha Stewart punch, trees are Quickutz, and as mentioned earlier, the reindeer are from the Create A Critter cartridge. Font is LD Charming Bold. As a final touch,  a small red rhinestone was added  for one of the reindeer's nose.  Sadly, I didn't have time to do anything much else creative this Christmas, except matching tags for take out boxes filled with cereal mix for dh to take to work....

and a half a dozen more gingerbread houses, this time in a larger size, so I could fill them with pizzelles.

The larger sized houses were about 3-1/2 inches wide on the bottom. Photo on the left shows the relative comparison in size.

Wrapped these in cellophane and shared them with friends. Really had fun making these larger sized houses, they were a lot easier and came together a lot quicker than the earlier tiny version. Only wish I had more time to make more! Maybe next year...

Hope everyone had a wonderful Christmas this year! And here's our Latte....

wishing everyone a "Merry Chris-MOOSE!"

Cricut Club Holiday Gift Swap

This is the stationery set I put together for our Cricut Club Holiday Party gift swap this year. I've always loved the cute decorated note pads I've seen posted by others and have been wanting to try one too. Been on the edge for a long time now about getting a BIA but read so many negative comments about the system that I hate to spend the $$$ for it. Instead, I decided to try a method shared by my friend Iris, where I used my 1/4 inch hole punch and a sheet torn from the store bought notepad as a template for the hole placements. For the notepaper holder, I used a tutorial shared by Stampin' Gal Val. The rose border on the note paper is a Darcy Hunter digital image colored with Copics, scanned then printed. The die cut bears are also Darcy Hunter digitals, imported into MTC and rendered into cut files. Filigree corners on the notepad are from a Cuttlebug corners set.

Also want to share all the great gifts that were created by the rest of the club members for the swap. Everyone is so super creative, and it was such a joy to see what they came up with....

Here are just two pages of a scrapbook album put together by Lynette...beautifully done and so much work!

A darling stocking shaped gift card holder by Aileen....

An exquisite brocaide ribon wreath crafted by Bonnie (left); and a sweet panda checkbook/stationery set by Kelly (right)...

A super cute Hello Kitty acrylic cup by Michele F. (left); and a fancy embellished waterglobe frame by Robyn (right);

An adorable pair of potholders, sewn & stenciled by Pat (left); and a set Christmas tags, too pretty to use by Laura (right)...

A fancy folded hexagonal box filled with goodies by Kris (left); and a delightful mini purse set crafted by Ev (right),

A very cute and cool Roladex Birthday Reminder by Iris (left); and lovely decorated plaque by Cindy (right)... 



                          

 And more Hello Kitty treasures! A sweet pink embellished clock by Brian (left); and a complete collection of stationery accessories from Cheryl.

In addition to the gingerbread houses I made, we each also received a sweet and clever hot chocolate/candy cane holder shared by Iris and cute Hello Kitty treat bag from Cheryl!

 It was so much fun seeing all the wonderful gifts everyone came up with...so much creativity going on, and so much fun learning how each was creaated!

Gingerbread Villa

Inspired by an adorable milk carton birdhouse box recently created by my friend and fellow member of our local Cricut Club, Aileen H., I thought I would try a gingerbread house version to give out as favors at our Cricut Club Holiday Party. I was also inspired by a fabulous haunted house created by Michele of My Simple Crafts and this darling gingerbread house by Teri of big Ideas Fron A Little Girl. For mine, I used Design Studio to enlarge the milk carton cutfile I had used earlier this year to do my Easter milk carton boxes so the bottom would be 2-1/2 inches square.

The biggest challenge for me with these gingerbread houses was to figure out how to do the roofs. I knew I wanted to do it in a way such that the recipient could get to the goodies inside without destroying the whole house, but I couldn't remember how Aileen had done the roof on her birdhouse, and unfortunately, I had not yet seen the houses created by Michele and Teri.

My snowtopped roof was created by welding circles of various sizes to the edges of a rectangle, using the George cartridge and Design Studio. Scored and folded this 1/ 2 inch along the long edges and then in half. Notches were cut at the center point and mitered so that the angle of the roof would fit the top of the milk carton. The roof was then attached to the house by punching matching holes in the roof and milk carton and threading  ribbon through to hold it in place. I liked how the finished roof turned out, but truthfully, I knew it would be a pain to put back together once it had been opened.

Decorating the sides of the gingerbread house was fun. Welded circles to one edge of a rectangle in Design Studio for the snow border, welded a circle and a square for the door. Gingerbread boy is from the Paper Dolls Dress Up cartridge, frame for sign from George, peppermint candy from Simply Charmed, and trees and candycanes are old 2x2 Quickutz dies. I really liked Teri's idea of adding a sentiment to the back, but since I didn't have a stamp, mine had to be computer generated using LD Charming Bold and 2 Peas Flea Market fonts.

When I was finally ready to fill my gingerbread houses with candy, I stopped short of gluing the bottoms closed as orignally planned, thinking how difficult it would be to re-assemble once the roof had been taken off. Decided to try a slotted bottom closure by cutting off a square piece from each of the bottom flaps. Happy to say this worked perfectly, providing a really easy way to get to the treats without having to worry about any re-assembling afterwards. Wouldn't recommend using this type of closure if the contents of the box were too heavy, but for candies and treats, this works like a charm!

Happy Birthday, Super Guy!

When dh celebrated his birthday last month, I decided to have another go at an accordian flag book style card. This time I used a trifold style card as my base and added a ribbon tie to keep the card neatly closed. I used the From My Kitchen cart for this 3 layer cake slice cut for the front of my card and added a candle created with George and Design Studio.

I put my sentiment onto the inside flap of the card and added a border using the Superman logo.

And here's the card stretched open to show the flags. I really like how the accordian folds in the center hold the layers of "flags". It's so much fun to stretch this open and hear the "flags" flap and line up in place! Here are some closeups and a view from the top to show how the "flags" are placed onto the pleated folds and how they line up.

I used Plantin Schoolbook for the letters on the "flags" and backed them with red foil board to add a little shine. The shooting stars come from the Superman cartridge,but Superman is actually a MTC cut created and generously shared by Zenita on her blog, Scrapping with Z. 

I liked Zenita's version of Superman better than the more detailed ones on the Superman cartridge because hers cut more cleanly and easily for the smaller sized cut I needed to fit my card.
You can find links to instructions on the construction of flag books over at my favorite place to go for interactive cards, Extreme Cards and Papercrafting.

And finally, this is the box I created to hold the card. These turn out to be quite bulky so I like to put them in a box rather than trying to force it into an envelope. Used a belly band decorated with a gold seal embossed with a Cuttlebug image of a birthday cake to keep the box closed. Since I couldn't wrap the golf clubs I got him, this was a fun way to give dh something to open for his birthday!