I put together these Christmas tree lanterns or luminaries to be used as gift card holders to give to friends and family this holiday season.
The original svg template for the tree and star for this project was designed by Makamo Creations. I sized the template to as large as I could cut from a 12 x 12 sheet of Diamond Bazzill Bling cardstock and glued vellum panels inside. I should mention that I also added a few extra star cuts on each panel of the tree to maximize the lantern glow. Once cut, the tree itself was very easy to fold and assemble; the gold star on top: not so much. Since I knew I would be needing a place to include a giftcard, I added a tree trunk and a square box as a base for the tree to stand.
The 3D star tree topper was probably the most challenging part of this entire project for me. The gold metallic foil board I chose to use was not very pliable and although I watched in amazement how the designer assembled the star using a hot glue gun in the tutorial, I knew there was no way my fingers would be able to stand the heat. Instead I opted to use Beacon 3 in 1 adhesive because I knew I'd be able to wipe off most of the excess glue mess with Un-du adhesive remover. I also glued several flatback crystal gemstones in two sizes to each tree to give the tree some sparkle.
I made a cylinder from cardstock and attached it over a circle I had cut in the bottom of the tree for a tree trunk. This trunk was then glued directly over a circle I had cut on the top of a square box for the base of my lantern. Gold foil board and glitter cardstock cut with Photoplay's "Merry Christmas" die was used for a glittery shadowed greeting and adhered to the front panel of the base.
Here's a view inside the box base with the flap lid open. Adding the cylindrical trunk and box created a place to easily access the on/off switch to the flameless candle for the lantern as well as a place where I could enclose a gift card.
These are the enclosure cards I made to hold the gift cards I placed in the base box of the Christmas tree lanterns. The front of the card is a piece of white cardstock hot foiled with Papertrey Ink's "Cascading Dots" plate which was layered on top red and green metallic foil board. Spellbinder's "Sealed Twine" die was used to cut the faux twine border from gold foil board and I added red and green Merry Christmas wax seals. I used a Marvy Uchida DecoColor gold paint pen to color the impression on the seals.
This is what the Christmas tree lantern looks like with the flameless candle turned on.
After wrapping thirteen Christmas tree lanterns in cellophane and gold ribbon, these tags were tied on. I used the foiled cardstock left over from making the gift card enclosures, matted on gold foil board. Simon Hurley's "Joyful Christmas Sentiments" plates and dies were used to foil and die cut the sentiments. Inside, the tags included instructions to each recipient on where they would find the on/off switch to the lantern as well as their gift card.
I used the same paper pieced reindeer head and body svg file that I used to decorate my treat boxes (see previous post) to decorate these trays to hold bags of Chex Mix we made to share with family and friends.
Since these packages of Chex Mix were considerably larger than the packages of puffed rice, I opted to simply make a tray with front and back panels for the Chex Mix to sit in.
I used the same tag idea I used for the smaller reindeer boxes, with small changes in the wording.
We filled smaller window mylar bags with Chex Mix for hubby's golf buddies.
It's nice that these red mylar bags looked festive enough so all that was needed was to attach a fun gift tag. Found a cute clipart image of golfing Santa on Etsy to use for these.
My first Christmas project of the season was a dozen of these reindeer treat boxes, made to share with friends at a holiday dinner get together.
Inspired by the many cute reindeer face images I saw online, I tried to create something similar in Make the Cut Design studio. I knew I would be putting puff rice treats in my boxes so I created the template for a flap style treat holder that would be just the right size for one package of puff rice treats.
The treat boxes were designed with a tuck in front flap closure. I glued the paper pieced reindeer heads onto this flap so the treat boxes could easily be opened simply by lifting up reindeer's head.
For a fun final touch, I created a "punny" print and cut gift tag and matted it with glitter cardstock to add to the front of the box. Tiny hearts were cut using a Carla Craft mini heart punch and the dies for the candy cane are from Karen Burniston's Stocking Pop Up die set.
This is the card I put together to send with our little Thanksgiving "care package" to our granddaughter this year.
I've been wanting to try a landscape format accordion card for quite awhile, especially after seeing all the wonderful cards others have been creating in this style. For the base of my card, I used Lori Whitlock's Swing Through Valentine Card Cut file, and adjusted the length of the window and frame of the card to be rectangular. Each of the three panels measures 7.25" x 4.25".
Although the finished card is too large to fit into a legal size envelope, I intentionally made this card oversized because I wanted to be able to comfortably fit the cute raccoon and fox die cuts onto the panels.
Several different die sets were used to decorate the three card panels. Marianne Design Eline's Collectibles dies were used to create the fox and raccoon, Lawn Fawn's Grassy Borders, Karen Burniston's Upsy Daisy Pop Up for the flowers, Spellbinders Be Bold Blossoms for the leaves, and a retired Quickutz die for the pumpkin.
I added our computer/printer generated sentiment to the center panel of the accordion. Thank you for stopping by today. Hope you're having a relaxing and enjoyable Thanksgiving!
Today I'm sharing the card and matching gift card holder I made to send to our daughter for her birthday.
On the front of the card, I decorated the two panels showing through the window with my favorite flowers cut using Spellbinders "Be Bold Blooms" die set and a cute bunny cut and pieced together using dies from Marianne Design Eline's Collectable "Baby Bunny" Set. White pearlized cardstock was used for the panel insets and run through Cuttlebug's "Modern Wallpaper" embossing folder for texture. The sentiment was created using Memo and Hello Valentica fonts in Make the Cut design program.
On the inside, I used a Doubled Hinged Pop Up mechanism to add movement for a fun interactive card. As the card is opened, the two side panels move apart to reveal the panel behind them. Video tutorial and templates for this pop up card by Tatyana Zhykova of Crazy Paper can be found here.
I used my printer to print the sentiment on the inside and cut it with a shadow layer on my Silhouette Cameo.
Other than the two sentiments on this card, all other embellishments were created using the dies I mentioned earlier plus Karen Burniston's "Big Birthday Charms" set for the cake slice and presents.
My new favorite way to give a gift card is to enclose it in a box assembled using Karen Burniston's "Slider Box" dies and decorate it to match the card. Lawn Fawn's "Happy Birthday Border" die was used to cut the words on the front.
I always love a surprise element and I'm finding that it's fun to attach the gift card to a rubber band activated Bam Box and add in a pair of pop up cubes in the slider box for some birthday excitement. Pretty sure nearly everyone on my birthday card list will be getting one soon!
I have one last post for Halloween this year; this time to share some of the fun treat boxes I received from crafty friends. This adorable Hello Kitty potion bottle filled with treats was created by my dear friend Kris.
The template for this bottle was designed and shared by Debbie of Paper Pulse blog here. I really like how you can see the treats inside through the acetate window. And best of all, I love how Kris decorated her potion bottle to be extra special by adding a dry embossed spider web texture and an adorable paper pieced Hello Kitty dressed in her pumpkin costume to the window.
Never to disappoint, my amazingly creative friend Lorna really knocked it out of the park again this Halloween with her dancing Wednesday Addams treat box. Lorna used a super cute print and cut clip art image of Wednesday Addams dressed up with black tulle and stood her onto a condiment cup filled with treats.
The condiment cup, which serves as the base is covered with patterned paper and embellished with dancing skeletons. On the front is a label with lyrics to Lady Gaga's "Bloody Mary" which Tik Tokkers had added to Wednesday's iconic dance scene video, causing it to go viral. So much attention to detail!
Lorna also put together these very kawaii paper pieced pumpkin and kimono clad chibi vampires to decorate packages of treats.
Even the gift bag all the goodies came in was decorated with a waving Hello Kitty in her black cat costume!
Our sweet friend Heather delighted us once again this Halloween with her super cute decorated cookies. Halloween is always so much fun, especially with special friends that are so creative and talented!
When I learned our granddaughter would be dressing up as "Barbie in her Gingham Dress" for Halloween, I started putting together a few fun PINK goodies so we could send her a Barbie themed Halloween package.
First, the card: I used Make the Cut Design program to convert a coloring page image of Barbie, a spider web and a wtich's hat clip art into cutfiles for the front of my card. I picked up a Dolly font bundle which included cute Barbie clipart and icons from Exordia Designs to use for the sentiments, and cut out embellishments.
On the inside of the card, I installed Karen Burniston's Twist Flower Pop Up mechanism. The movement of this pop up is a little difficult to capture with still photos alone so I have a short video to demonstrate the movement of this fun pop up.
Since this was a slimline format card, I could fit three of the Twist Flower Pop Up mechanisms in the card. The top and bottom panels with the orange flower shapes pop up and twist to the left while the larger center panel twists to the right as the card is opened. I also attached two die cut bats to the center round panel with strips of acetate so they twist and appear to be flying when the card opens. Barbie silhouette and crown svgs came as part of the Dolly font bundle, bats were die cut from Karen Burniston's Haunted Tiny House Add Ons, and black cat and jack-o-lantern were clipart images rendered into cut files.
Since I had not seen the Barbie movie yet, I watched the movie trailer hoping to get ideas and creative inspiration for fun things I could put together that our granddaughter might enjoy. I thought this shoe from the movie and references to "Barbie feet" vs flat feet were hilarious. It got me thinking, "Hey, I think I can make that!"
I used the free svg cut file for paper witch shoes shared by Cindy Louh on her website here. This is the same template I used to make the witch shoes which I posted last week. But since this one was for Barbie, I used pearlescent pink cardstock instead of black, and attempted to duplicate the heart shaped rhinestone shoe clip.
The next fun little thing I made was this Barbie Eyeshadow Compact...
The inspiration for this came from a similar one posted on Instagram and created by Ideas Caprichosas.
The eye shadow compact was made with circles of glitter and pearlescent cardstock to look like the eye shadows with a foil board mirror. I found clipart of a shadow brush and used Make the Cut Design program to convert it into an svg cut file. The completed paper pieced compact was then glued onto a box with side flaps and filled with candy.
The third little surprise was this personalized pop up slider box with a gift card to her favorite store. I used the Dolly font to make a layered cut out of her name for the front of the box. A little hard to see in the photo but lighter pink panels were dry embossed with Sizzix Stars and Swirls embossing folder and trimmed with glitter cardstock and tiny rhinestones for glitz.
I think I had the most fun this Halloween putting together this box of surprises for our granddaughter. Hope you enjoyed your Halloween too!
I cut and assembled these fun and "not so spooky" lanterns to share with friends on Halloween this year.
I found the template/svg cut file for these gable box shaped lanterns designed by Quietfire at the Lori Whitlock Shop. The cut out image of the black cat and spider web that I used for the lantern panels comes from Lori Whitlock's three panel Halloween Scene Cat.
The original size of the gable box lanterns turned out to be 2.75 inches wide and 6.5 inches tall. I added another 1.5 inches to the bottom of my lanterns so there would be room to hold Halloween candies.
I also added a shelf inside the lantern so a tea light could be attached, and I changed the bottom closure to a flip top so the tea light would be easily accessible to turn on.
After wrapping the lanterns in cellophane bags, I added a tag so the recipient would know where to find the candies and switch to turn the lantern on.
I'm finding making lanterns and luminaries are fun and thinking I might want to make a Christmas themed one too...
